Description
WLY602030 3.7V 300mAh Micro LiPo Battery – LOFTY AGROTECH
Introduction to 3.7V 300mAh Micro LiPo Battery
The 3.7V 300mAh Micro LiPo Battery is a compact, lightweight, and high-performance power solution designed for modern electronics, micro drones, wearables, and IoT devices. Its small size does not compromise power output, making it ideal for applications where energy efficiency and portability are critical.
At LOFTY AGROTECH, the WLY602030 is engineered for maximum reliability, safety, and long cycle life. Compared to traditional batteries like NiMH or AA, micro LiPo batteries deliver higher energy density, low self-discharge, and consistent voltage output, ensuring devices run efficiently over extended periods.
Advantages of the 3.7V 300mAh Micro LiPo Battery
High Energy Density
The 3.7V 300mAh Micro LiPo Battery packs significant energy in a small form factor, making it perfect for micro drones, wearables, and IoT devices. Users benefit from extended operational times without increasing device size or weight.
Lightweight and Compact Design
Weighing only 6 grams and measuring 6mm × 20mm × 30mm, the battery is extremely lightweight. Its compact design allows seamless integration into small electronics without affecting portability.
Long Cycle Life and Rechargeability
This battery supports over 300 charge-discharge cycles, providing long-term reliability and cost-effectiveness. Unlike batteries with memory effect, the 3.7V 300mAh Micro LiPo Battery maintains full capacity even after repeated charges.
PCM Protection for Safety
Integrated Protection Circuit Module (PCM) safeguards the battery from overcharge, over-discharge, and short circuits, ensuring safe usage in sensitive electronics like drones, IoT sensors, and wearable devices.
Low Self-Discharge Rate
The 3.7V 300mAh Micro LiPo Battery retains its charge even when not in use, ensuring devices are ready for operation whenever needed. This is critical for IoT sensors and wearable electronics that rely on consistent power.
Technical Specifications of WLY602030 3.7V 300mAh Micro LiPo Battery
The WLY602030 3.7V 300mAh Micro LiPo Battery from LOFTY AGROTECH is engineered to meet the high-performance requirements of micro drones, wearables, IoT devices, and portable electronics. Each specification ensures reliable operation, long cycle life, and safety, making it ideal for compact and demanding applications.
| Specification | Details |
|---|---|
| Model No. | WLY602030 |
| Nominal Voltage | 3.7V |
| Nominal Capacity | 300mAh |
| Continuous Charge/Discharge | 0.5C |
| Maximum Charge/Discharge Rate | 1C |
| Connector Type | Open Wire |
| Life Cycles | ≥300 at 0.5C to 2.75V |
| Dimensions (T × B × L) | 6mm × 20mm × 30mm |
| Max Size including PCB | 6mm × 20mm × 32.5mm |
| Weight | 6g |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 5 × 1 cm |
Model Number: WLY602030
This model number identifies the specific battery series, designed for small form factor devices requiring consistent power output and high energy density. It ensures compatibility across a variety of wearables, IoT sensors, and micro drones.
Nominal Voltage: 3.7V
The battery provides a nominal voltage of 3.7 volts, which is standard for single-cell LiPo batteries. This stable voltage ensures reliable performance in sensitive electronics without risk of overloading or instability.
Nominal Capacity: 300mAh
With a nominal capacity of 300mAh, this micro LiPo battery stores enough energy to power micro drones, IoT devices, and wearable electronics for extended periods. Its high energy density in a compact form factor makes it ideal for small, portable devices.
Continuous Charge/Discharge: 0.5C
The WLY602030 supports continuous charge and discharge at 0.5C, allowing steady energy flow without overheating or stressing the internal cells. This ensures longevity and stable performance during regular usage.
Maximum Charge/Discharge Rate: 1C
For high-demand situations, the battery can handle up to 1C maximum charge and discharge rate, making it suitable for devices that occasionally require higher bursts of power, such as micro drones or portable IoT devices.
Connector Type: Open Wire
Equipped with open wire connectors, this battery allows flexible integration into various devices. Users can attach custom connectors or directly solder the wires to their circuits according to device requirements.
Life Cycles: ≥300 at 0.5C to 2.75V
The WLY602030 offers a long lifespan of over 300 charge-discharge cycles when discharged to 2.75V at 0.5C. This makes it cost-effective and ensures reliable operation over long-term usage.
Dimensions (T × B × L): 6mm × 20mm × 30mm
The compact size of this battery allows easy integration into micro drones, wearables, IoT devices, and electronic toys without affecting device design or portability.
Maximum Size Including PCB: 6mm × 20mm × 32.5mm
Including the Protection Circuit Module (PCM), the maximum size slightly increases to 32.5mm in length. This ensures added safety without significantly increasing the battery footprint.
Weight: 6g
Weighing only 6 grams, the WLY602030 is lightweight, contributing minimal additional weight to micro drones, wearable devices, or portable electronics while maintaining high energy storage capacity.
Shipping Weight and Dimensions
The battery is lightweight and easy to transport, with a shipping weight of 0.01 kg and dimensions of 5 × 5 × 1 cm. This compact packaging makes handling, shipping, and storage safe and convenient.
The WLY602030 3.7V 300mAh Micro LiPo Battery is designed to deliver stable, consistent performance for compact electronics, micro drones, and IoT devices, meeting rigorous demands for modern applications.
Features of the WLY602030 3.7V 300mAh Micro LiPo Battery
The WLY602030 3.7V 300mAh Micro LiPo Battery from LOFTY AGROTECH is designed to meet the rigorous demands of modern electronics, micro drones, wearables, and IoT devices. Its advanced features ensure reliable performance, safety, and longevity, making it a top choice for compact and portable devices.
Lightweight and Compact
With dimensions of 6mm × 20mm × 30mm and a weight of just 6 grams, this micro LiPo battery is extremely lightweight and compact. Its small size allows easy integration into micro drones, wearables, and portable electronics without affecting device design or adding bulk. Users benefit from a battery that provides high energy density while keeping their devices sleek and portable.
Low Mold Opening Cost
Manufactured using a cost-efficient production process, the WLY602030 allows scalable manufacturing for both hobbyist and industrial applications. The low mold opening cost ensures affordability without compromising on quality, making it accessible for large-scale production or personal projects.
PCM Protection
The integrated Protection Circuit Module (PCM) safeguards the battery against overcharge, over-discharge, and short circuits. This ensures safe operation and prolongs the lifespan of both the battery and the connected devices. PCM protection is especially important for micro drones and wearable electronics where safety and reliability are critical.
No Memory Effect
Unlike NiCd batteries, the 3.7V 300mAh Micro LiPo Battery does not suffer from memory effect. This means it can be recharged at any time without reducing its maximum capacity. Users can safely charge the battery as needed, without worrying about loss of efficiency over repeated cycles.
Long Cycle Life
This micro LiPo battery supports over 300 charge-discharge cycles, offering long-term reliability and consistent performance. A long cycle life reduces the need for frequent replacements, making it both cost-effective and environmentally friendly.
Excellent Charging and Discharging Characteristics
The WLY602030 supports 0.5C continuous charge/discharge and up to 1C maximum, making it suitable for high-demand devices. This ensures steady energy output, minimal voltage sag, and efficient operation for micro drones, IoT devices, wearables, and electronic toys.
Applications of the WLY602030 3.7V 300mAh Micro LiPo Battery
The WLY602030 3.7V 300mAh Micro LiPo Battery is versatile and specifically designed for compact, high-performance electronic devices. Its lightweight, high-energy density, and PCM protection make it suitable for a wide range of applications in modern technology.
Wearables
The 3.7V 300mAh Micro LiPo Battery is ideal for wearable devices such as smartwatches, fitness trackers, and health monitoring gadgets. Its compact form factor allows for seamless integration without adding bulk, while its long-lasting charge ensures devices remain operational throughout the day. Users benefit from reliable, stable power for continuous monitoring, notifications, and device functions.
Micro Drones
Micro drones demand lightweight batteries with stable voltage output for optimal flight performance. The WLY602030 3.7V 300mAh Micro LiPo Battery delivers consistent power to motors and electronics, improving flight time, responsiveness, and maneuverability. Its high energy density allows longer flights without increasing the drone’s weight, making it a perfect choice for hobbyists and professionals alike.
IoT Devices
Internet of Things (IoT) applications such as sensors, smart home devices, and trackers require batteries with low self-discharge and reliable energy supply. The 3.7V 300mAh Micro LiPo Battery supports continuous operation of these devices over extended periods, ensuring accurate data collection, connectivity, and performance even in remote or low-maintenance setups.
Electronic Toys
From small drones to robotic kits, electronic toys benefit from the safe, high-density energy provided by the WLY602030 Micro LiPo Battery. It enables longer playtime, consistent performance, and quick recharging without compromising safety, making it ideal for children’s electronics and hobbyist kits.
Portable and Wireless Devices
The 3.7V 300mAh Micro LiPo Battery is also perfect for portable gadgets such as mini cameras, wireless headsets, and other compact electronics. Its lightweight and rechargeable design ensures that devices remain portable and convenient, providing reliable energy for travel, outdoor activities, and everyday use.
Safety Precautions for the WLY602030 3.7V 300mAh Micro LiPo Battery
Using and handling LiPo batteries safely is critical to prevent accidents and ensure long-term performance. The WLY602030 3.7V 300mAh Micro LiPo Battery is designed with safety features such as a Protection Circuit Module (PCM), but following proper precautions is essential for safe operation.
Temperature Guidelines
Never store or use the battery in extreme temperatures. The recommended operating range is between 0°C and 50°C. Exposing the battery to temperatures below freezing or above 50°C can cause chemical instability, reduce capacity, or even result in swelling, leakage, or permanent damage.
Safe Storage Practices
Always disconnect the battery from your device when not in use. Store it in a fireproof and non-conductive container to minimize the risk of short circuits, fire hazards, or accidental contact with metallic objects. Proper storage prevents damage and ensures the battery remains ready for safe use.
Avoid Direct Sunlight and Heat Sources
Do not expose the battery to direct sunlight, heaters, or other high-temperature environments. Excessive heat can degrade the internal chemistry, causing a reduction in performance and potentially hazardous situations.
Cooling Before Charging
After usage, allow the battery to cool down before charging. Charging a warm or hot LiPo battery can lead to overheating, reduced cycle life, and potential safety hazards. Waiting for the battery to reach ambient temperature ensures safe charging.
Follow Manufacturer Guidelines
Always follow the manufacturer’s instructions for charging, storage, and disposal. Using recommended chargers, observing correct voltage limits, and adhering to safe handling procedures ensures optimal performance and long battery life.
Additional Safety Tips
- Do not puncture, crush, or disassemble the battery.
- Avoid dropping the battery or subjecting it to strong impacts.
- Keep the battery out of reach of children and pets.
- Dispose of used or damaged batteries following local regulations for lithium-ion and LiPo batteries.
By adhering to these safety precautions, users can maximize the lifespan and performance of the WLY602030 3.7V 300mAh Micro LiPo Battery while ensuring safe operation in wearables, micro drones, IoT devices, and other compact electronics.
Charging and Maintenance Tips for the WLY602030 3.7V 300mAh Micro LiPo Battery
Proper charging and maintenance are critical to ensure the WLY602030 3.7V 300mAh Micro LiPo Battery delivers optimal performance, longevity, and safety. Following the correct procedures not only extends battery life but also protects connected devices from potential damage.
Use Compatible Chargers
Always use chargers specifically designed for LiPo batteries. The WLY602030 supports a continuous charge rate of 0.5C and a maximum charge rate of 1C, which is ideal for safely replenishing the battery’s energy without causing overheating or stress on the cells. Using incompatible chargers or exceeding the recommended charging rate can lead to reduced battery life, swelling, or even safety hazards. For best results, select a charger with built-in LiPo balancing and safety features to maintain stable charging and protect the battery.
Avoid Overcharging
Overcharging a 3.7V 300mAh Micro LiPo Battery can severely damage the internal chemistry, causing swelling, reduced capacity, or permanent failure. The maximum recommended voltage per cell is 4.2V. Always monitor the charging process, and disconnect the battery immediately after it reaches full charge. Modern LiPo chargers often include automatic cut-off features, which prevent overcharging and enhance safety during routine use.
Proper Storage
For long-term storage, the WLY602030 should be charged to 3.8–3.9V per cell, which is considered the optimal storage voltage. Storing the battery fully discharged or fully charged for extended periods can reduce its lifespan. Keep the battery in a cool, dry, and ventilated environment, away from direct sunlight, heat sources, or humid conditions. Using a fireproof container is recommended for added safety. Proper storage helps maintain the battery’s capacity, reduces self-discharge, and prevents swelling or degradation over time.
Periodic Inspections
Regularly inspect the battery before each use. Check for any swelling, leakage, or physical damage to the casing and connectors. If any abnormalities are detected, stop using the battery immediately and replace it. Periodic inspections ensure safe operation, prevent potential hazards, and help maintain the battery’s high performance.
Additional Maintenance Tips
- Allow the battery to cool down for a few minutes after use before recharging, especially after high-current operations.
- Avoid exposing the battery to extreme temperatures, both during use and storage. Temperatures above 50°C or below 0°C can damage the cells.
- Never puncture, crush, or short-circuit the battery terminals. Doing so can lead to thermal runaway or permanent failure.
- Maintain proper connection polarity when charging or connecting the battery to devices to avoid internal damage.
By following these charging and maintenance guidelines, users can maximize the WLY602030 3.7V 300mAh Micro LiPo Battery’s reliability, lifespan, and safety, making it a dependable choice for micro drones, wearables, IoT devices, and other portable electronics.
FAQs About the WLY602030 3.7V 300mAh Micro LiPo Battery
The WLY602030 3.7V 300mAh Micro LiPo Battery is a versatile and high-performance power source for micro drones, wearables, IoT devices, and portable electronics. Here are some frequently asked questions to help you understand its capabilities and usage.
Q1: Can I use this battery in micro drones?
A: Yes, the WLY602030 is specifically optimized for micro drones. Its stable voltage output ensures smooth and consistent flight performance, while the high energy density provides longer flight times without adding unnecessary weight. This makes it ideal for hobbyist drones, racing drones, and compact aerial devices.
Q2: How long does a 300mAh LiPo battery last?
A: The runtime of a 3.7V 300mAh Micro LiPo Battery depends on the device’s power consumption. For low-power IoT devices or wearable electronics, the battery can last several hours to days on a single charge. For high-drain applications like micro drones, the operational time will vary based on motor load, flight conditions, and device settings. Regular use and proper maintenance will help maximize battery life.
Q3: Is it safe to use this LiPo battery?
A: Absolutely. The WLY602030 features a Protection Circuit Module (PCM), which safeguards against overcharge, over-discharge, and short circuits. When used according to manufacturer guidelines for charging, storage, and handling, this battery is safe for a wide range of applications including wearables, IoT sensors, micro drones, and electronic toys. Always inspect the battery before use and avoid exposing it to extreme conditions.
Q4: Can I replace Li-ion batteries with this LiPo battery?
A: Yes, micro LiPo batteries like the WLY602030 3.7V 300mAh Micro LiPo Battery offer higher energy density and a more compact design compared to traditional Li-ion batteries. This makes them ideal for portable electronics, wearables, and compact devices where space and weight are critical. Additionally, LiPo batteries support more consistent voltage output and better performance under high-drain conditions.
Q5: How should I store this battery for long-term use?
A: For long-term storage, charge the battery to 3.8–3.9V per cell and store it in a cool, dry, and ventilated environment. Avoid extreme temperatures, direct sunlight, and high humidity. Using a fireproof container is recommended for additional safety. Proper storage preserves battery life, reduces self-discharge, and maintains optimal capacity.
Q6: What should I do if the battery shows swelling or damage?
A: If you notice any swelling, leakage, or physical damage, discontinue use immediately. Swollen or damaged LiPo batteries can pose fire or safety risks. Dispose of them according to local regulations for lithium batteries and replace them with a new WLY602030 3.7V 300mAh Micro LiPo Battery to ensure safe operation.
Conclusion
The WLY602030 3.7V 300mAh Micro LiPo Battery from LOFTY AGROTECH is a versatile, high-performance energy solution for modern compact electronics. Its lightweight design, high energy density, long cycle life, PCM protection, and low self-discharge make it perfect for wearables, micro drones, IoT devices, and electronic toys.
Link
In stock now. Limited quantities available. Ships within 24 hours.
LOOKING FOR MORE? DISCOVER EVERYTHING WITH OFFER AT http://www.loftyagrotech.com
Explore more in our camera drone collection and find the right aerial companion.
Before flying, ensure you’re compliant with India’s drone regulations (DGCA DigitalSky Portal).
Reviews
There are no reviews yet.