Description

TATTU G-TECH 10000mAh 6S 25C 22.2V LiPo Battery for UAV Drones

Available at DB&C BY LOFTY AGROTECH

---

Introduction to TATTU G-TECH Battery

The TATTU G-TECH 10000mAh 6S 25C 22.2V LiPo Battery is a high-performance lithium polymer power solution engineered specifically for professional UAV drones and heavy-duty aerial systems. Designed to deliver reliable voltage stability, strong discharge capability, and extended flight endurance, the TATTU G-TECH Battery supports demanding commercial and industrial drone operations.

In the rapidly expanding UAV industry, power consistency directly impacts safety, efficiency, and mission success. The TATTU G-TECH Battery is built to meet these requirements with advanced lithium polymer cell technology, a stable 6S configuration, and a 25C continuous discharge rate. Available at DB&C BY LOFTY AGROTECH, this battery pack is ideal for agricultural drones, mapping UAVs, surveillance systems, and heavy-lift multirotor platforms.

---

High-Capacity 10000mAh for Extended Flight Performance

One of the most significant advantages of the TATTU G-TECH Battery is its impressive 10000mAh capacity. In drone operations, higher capacity translates into longer flight time and improved productivity.

With the TATTU G-TECH Battery, operators benefit from:

• Extended spraying duration in agricultural drones

• Longer mapping and surveying missions

• Increased aerial photography session time

• Reduced downtime between flights

• Greater coverage per battery cycle

The 10000mAh capacity ensures that professional UAV operators can maximize efficiency without frequent battery replacements during operations.

---

6S Configuration – Stable 22.2V Output

The TATTU G-TECH Battery features a 6S configuration, meaning six lithium polymer cells are connected in series to deliver a nominal voltage of 22.2V. This voltage range is widely compatible with high-performance brushless motors and professional-grade ESC systems.

The 6S setup in the TATTU G-TECH Battery provides:

• Stable voltage under load

• Smooth throttle response

• Consistent motor RPM

• Efficient thrust generation

• Reduced ESC stress

This configuration makes the TATTU G-TECH Battery suitable for both heavy-lift and endurance-based drone platforms.

---

25C Continuous Discharge for High Current Demand

The 25C discharge rating of the TATTU G-TECH Battery ensures it can safely deliver high current without overheating or experiencing voltage sag. High discharge capability is critical for drones that require rapid acceleration or carry heavy payloads.

Benefits of the 25C discharge rate include:

• Stable performance during rapid ascent

• Reduced voltage drop during heavy lift

• Improved control system reliability

• Lower internal heat generation

• Consistent output during demanding flight maneuvers

For agricultural and industrial UAVs, the TATTU G-TECH Battery offers dependable current delivery throughout extended operations.

---

Advanced Lithium Polymer Cell Technology

The internal cells of the TATTU G-TECH Battery are engineered for low internal resistance and balanced energy output. This ensures that each cell discharges evenly, maintaining voltage consistency and enhancing battery lifespan.

The advantages of high-quality cell construction include:

• Improved energy efficiency

• Stable voltage retention

• Longer operational lifespan

• Reduced risk of cell imbalance

• Consistent flight stability

The TATTU G-TECH Battery is manufactured to meet professional UAV power standards.

---

Designed for Professional UAV Applications

The TATTU G-TECH Battery is suitable for a wide range of commercial and industrial drone applications.

Agricultural Spraying Drones

The TATTU G-TECH Battery supports drones used in precision farming and crop spraying, enabling longer spray coverage and increased operational efficiency.

Survey and Mapping UAVs

Stable voltage output from the TATTU G-TECH Battery ensures reliable data collection during long-distance mapping missions.

Industrial Inspection Drones

For infrastructure inspection, power line monitoring, and oil & gas facility surveys, the TATTU G-TECH Battery provides consistent power for critical flight tasks.

Aerial Photography and Cinematography

Smooth discharge characteristics ensure stable motor performance, which is essential for vibration-free camera operation.

---

Voltage Stability and Flight Safety

Voltage stability is one of the most important characteristics of a professional UAV battery. The TATTU G-TECH Battery minimizes voltage sag during heavy throttle use, ensuring predictable and safe flight performance.

Stable voltage from the TATTU G-TECH Battery helps maintain:

• Reliable GPS lock

• Smooth hovering capability

• Accurate altitude control

• Consistent thrust output

• Safe landing performance

This stability reduces mid-flight risks and enhances overall drone reliability.

---

Thermal Management and Heat Resistance

High-capacity batteries can generate heat under heavy load. The TATTU G-TECH Battery is designed with efficient internal resistance control and balanced cell distribution to minimize heat buildup.

Thermal advantages include:

• Reduced overheating risk

• Improved cycle life

• Safe operation under extended load

• Enhanced battery durability

This ensures the TATTU G-TECH Battery performs efficiently even in demanding flight environments.

---

Structural Durability for Field Operations

Drone operations often involve vibration, wind turbulence, and minor impacts. The TATTU G-TECH Battery features durable outer wrapping that provides mechanical protection during transport and flight.

Its rugged design ensures:

• Vibration resistance

• Structural stability

• Protection from minor mechanical stress

• Safe handling during installation

The TATTU G-TECH Battery is built for professional field conditions.

---

Long Cycle Life and Cost Efficiency

When properly charged and stored, the TATTU G-TECH Battery delivers extended cycle life. This translates into long-term cost savings for commercial drone operators.

With proper maintenance, the TATTU G-TECH Battery offers:

• Multiple charge cycles

• Stable long-term performance

• Reduced replacement frequency

• Improved return on investment

For drone businesses, reliability and durability directly impact profitability.

---

Charging and Maintenance Guidelines

To maintain optimal performance of the TATTU G-TECH Battery:

• Use a compatible 6S LiPo balance charger

• Avoid overcharging beyond recommended voltage

• Store at proper storage voltage when not in use

• Avoid deep discharge

• Inspect battery regularly before flight

Following these best practices ensures safe and efficient operation of the TATTU G-TECH Battery.

---

Why Choose LOFTY AGROTECH?

When purchasing high-capacity UAV batteries, choosing a trusted supplier is critical.

1. Quality Assurance

DB&C BY LOFTY AGROTECH ensures genuine and verified products.

2. Industry-Focused Expertise

We specialize in drone technology, electric mobility systems, robotics, and renewable energy components.

3. Reliable Availability

LOFTY AGROTECH maintains consistent stock to support commercial buyers and institutions.

4. Technical Support

Our team understands UAV power systems and can guide you in selecting the right battery.

5. Bulk Order Support

We support drone manufacturers, agricultural startups, and research institutions with scalable supply solutions.

6. Commitment to Innovation

LOFTY AGROTECH promotes advanced drone technology and sustainable power solutions.

Choosing LOFTY AGROTECH ensures dependable products backed by professional service.

---

Competitive Advantages of TATTU G-TECH Battery

Compared to generic drone batteries, the TATTU G-TECH Battery offers:

• 10000mAh high capacity

• Stable 22.2V 6S configuration

• Reliable 25C discharge rate

• Low internal resistance cells

• Professional UAV compatibility

These advantages make the TATTU G-TECH Battery ideal for industrial and commercial drone operations.

---

Future-Ready Power Solution

As UAV technology evolves toward AI automation, precision agriculture, and extended-range operations, power systems must keep pace. The TATTU G-TECH Battery is designed to support next-generation drone platforms requiring stable and reliable high-capacity energy sources.

Its balanced configuration and durable design ensure compatibility with advanced drone systems and heavy-lift multirotors.

---

The TATTU G-TECH Battery stands as a powerful, stable, and reliable energy solution for professional UAV drones. With its 10000mAh capacity, 6S 22.2V configuration, and 25C discharge rate, it delivers dependable performance for agricultural, industrial, and commercial applications.

Available at DB&C BY LOFTY AGROTECH, this battery supports innovation, efficiency, and long-term operational success in the growing UAV industry.

---

Advanced Power Engineering of TATTU G-TECH Battery

The TATTU G-TECH Battery is engineered with a focus on precision power delivery. In professional UAV systems, battery performance is not just about capacity—it is about consistency. The internal architecture of the TATTU G-TECH Battery ensures uniform current distribution across all six cells, minimizing imbalance and maintaining smooth voltage curves throughout the discharge cycle.

Because of this optimized internal structure, the TATTU G-TECH Battery delivers:

• Balanced cell discharge

• Reduced internal resistance

• Stable voltage plateau

• Improved energy efficiency

• Enhanced long-term reliability

This advanced engineering makes the TATTU G-TECH Battery highly dependable for critical aerial missions.

---

Performance During Dynamic Flight Conditions

Drone operations involve constant power fluctuations. Rapid climbs, sharp turns, hovering, and descent maneuvers all demand immediate current response. The TATTU G-TECH Battery responds instantly to throttle inputs without excessive voltage sag.

This responsiveness ensures:

• Strong vertical climb rate

• Smooth directional control

• Consistent hovering stability

• Predictable throttle response

• Reduced motor stress

For professional pilots and drone operators, the TATTU G-TECH Battery provides confidence in every maneuver.

---

Heavy-Lift Capability Enhancement

When drones carry professional payloads such as multispectral cameras, spraying tanks, or LiDAR equipment, the battery must maintain steady output under sustained load. The TATTU G-TECH Battery with its 25C discharge capability supports:

• Agricultural spraying systems

• Industrial inspection cameras

• Thermal imaging sensors

• High-resolution cinema rigs

• Delivery drone payload modules

The high current output ensures motors receive adequate power without instability.

---

Efficiency in Agricultural Drone Operations

Precision agriculture depends on endurance and coverage. The TATTU G-TECH Battery enables agricultural UAVs to cover larger farm areas per charge. Longer flight time reduces the need for frequent landings and battery swaps, improving operational efficiency.

Farm operators benefit from:

• Increased spraying coverage

• Reduced labor interruption

• Faster field completion

• Improved productivity

The TATTU G-TECH Battery plays a key role in modern smart farming solutions.

---

Optimized for Industrial and Commercial UAV Use

The TATTU G-TECH Battery is not limited to hobby drones. It is built for professional-grade UAV platforms used in:

• Power line inspections

• Infrastructure monitoring

• Mining site surveys

• Oil and gas facility checks

• Large-scale mapping projects

Stable power supply ensures accurate data collection and mission success.

---

Voltage Curve Stability and Flight Accuracy

A consistent voltage curve is essential for maintaining flight controller accuracy. The TATTU G-TECH Battery is designed to maintain voltage stability throughout most of the discharge cycle.

This contributes to:

• Reliable GPS positioning

• Accurate altitude control

• Stable autopilot functions

• Smooth return-to-home operations

• Safe landing sequences

Voltage stability from the TATTU G-TECH Battery enhances overall UAV system precision.

---

Thermal Efficiency and Safety Performance

Heat buildup is one of the biggest threats to battery life. The TATTU G-TECH Battery incorporates low internal resistance cells that reduce unnecessary heat generation during high current discharge.

Thermal advantages include:

• Reduced risk of overheating

• Extended battery cycle life

• Improved operational safety

• Enhanced chemical stability

Maintaining proper operating temperature allows the TATTU G-TECH Battery to perform consistently across repeated missions.

---

Reliability in Long-Endurance Missions

Long-range mapping and surveillance missions require sustained power. The TATTU G-TECH Battery is optimized for endurance-based operations.

Operators can rely on:

• Predictable flight time estimation

• Steady power delivery until safe landing

• Reduced mid-flight voltage warnings

• Efficient battery utilization

For commercial drone businesses, predictable endurance equals operational reliability.

---

Integration Compatibility

The TATTU G-TECH Battery is compatible with a wide range of professional drone platforms that support 6S 22.2V systems. It integrates smoothly with:

• High-performance ESCs

• Brushless motor assemblies

• Advanced flight controllers

• Power distribution boards

• Battery monitoring systems

Its standardized configuration makes the TATTU G-TECH Battery easy to integrate into new or existing UAV builds.

---

Maintenance Advantages

Proper maintenance ensures long service life. The TATTU G-TECH Battery supports efficient balance charging and stable storage characteristics.

Maintenance benefits include:

• Consistent cell voltage balance

• Reduced risk of swelling

• Improved long-term storage performance

• Minimal voltage drift

Following recommended charging guidelines ensures maximum lifespan for the TATTU G-TECH Battery.

---

Scalability for Drone Manufacturers

Drone manufacturers require reliable battery supply for production lines. The TATTU G-TECH Battery supports scalable integration for:

• Agricultural drone production

• Industrial UAV assembly

• Educational drone kits

• Research and development projects

Consistent specifications allow manufacturers to standardize system design around the TATTU G-TECH Battery.

---

Why LOFTY AGROTECH is the Right Choice

When selecting high-capacity UAV batteries, supplier credibility is crucial.

Trusted Source

DB&C BY LOFTY AGROTECH provides verified, quality-tested products suitable for professional use.

Industry Experience

LOFTY AGROTECH specializes in electric mobility systems, UAV components, robotics, and renewable energy technology.

Reliable Supply Chain

We maintain stable stock levels to support continuous operations for commercial buyers.

Technical Understanding

Our expertise in drone power systems allows us to guide customers toward the right battery solutions.

Bulk Order Support

We support startups, institutions, and industrial manufacturers with scalable supply options.

Commitment to Innovation

LOFTY AGROTECH supports the advancement of drone technology and smart agriculture solutions.

Choosing LOFTY AGROTECH ensures dependable service along with high-quality components.

---

Competitive Edge of TATTU G-TECH Battery

Compared to standard LiPo batteries, the TATTU G-TECH Battery offers:

• Professional 10000mAh capacity

• Stable 22.2V 6S configuration

• Reliable 25C discharge rate

• Balanced internal cell design

• Industrial UAV compatibility

This combination makes the TATTU G-TECH Battery suitable for high-demand commercial applications.

---

Future-Ready UAV Power Solution

As UAV platforms evolve to incorporate automation, AI navigation, and extended range capabilities, battery performance becomes even more critical. The TATTU G-TECH Battery is designed to support:

• Autonomous drone missions

• Long-range agricultural automation

• Smart city aerial surveillance

• Advanced mapping technologies

• Industrial automation UAV fleets

Its performance characteristics align with future-ready drone systems.

---

The TATTU G-TECH Battery continues to stand out as a dependable, high-capacity, and professional-grade LiPo battery solution. With stable discharge performance, balanced 6S configuration, and robust construction, it supports demanding UAV applications across industries.

Available at DB&C BY LOFTY AGROTECH, this battery is a trusted choice for drone professionals seeking reliable and efficient power systems.

EXTERNAL LINK:https://robu.in/product/lipo-battery/

INTERNAL LINK:http://loftyagrotech.com