Description
🔧 XT90 Plug Holder for Drones – Durable, Universal & Secure
Secure your power connections with the XT90 Plug Holder for Drones, designed to provide a firm and reliable mount for your XT90 connectors. This plug holder is made from durable, lightweight material and is compatible with all drone frames, ensuring easy installation across various drone types.
Whether you’re a DIY drone builder or upgrading your setup, the XT90 Plug Holder ensures your connectors stay fixed during flight, preventing loose connections and power drops. Ideal for racing, commercial, or hobby drones.
Take your drone build to the next level with our XT90 Plug Holder for Drones, a high-quality accessory designed to offer both convenience and security. Whether you’re flying an FPV racing drone, a cinematic quadcopter, or a custom-built UAV, this plug holder ensures that your XT90 power connector stays firmly locked in place during takeoff, flight, and landing.
💡 Why You Need an XT90 Plug Holder
Drones rely on strong, stable electrical connections between the battery and the electronic speed controller (ESC) or power distribution board. The XT90 connector is commonly used for this because it can handle high current. However, if this connector is not properly secured, several issues can arise:
⚠️ 1. Mid-Air Disconnections:
When a drone flies, it experiences constant vibration, sudden movements, and sometimes rough maneuvers. If the XT90 plug is loosely hanging, it can shift or jiggle due to these vibrations. This might cause the plug to disconnect momentarily—or completely—while the drone is in flight, leading to a total power cut.
🛑 Result: Your drone might fall out of the sky, crash, or lose control.
⚡ 2. Sudden Power Cuts:
Even if the plug doesn’t fully disconnect, a loose or partially connected plug can result in unstable electrical contact. This leads to voltage drops or current interruptions, which are dangerous for sensitive electronic components.
🧠 For example: Your flight controller or ESC may reboot mid-flight, causing erratic behavior or complete failure.
🔥 3. Damage to Electronics:
Loose connectors can generate electrical sparks or arcing, especially when current is flowing during a sudden disconnection. Over time, this can:
-
Burn or melt the connector
-
Damage the ESC or flight controller
-
Reduce battery efficiency
⚠️ In worst cases, this can lead to short circuits or even fire.
✅ How the XT90 Plug Holder Helps:
The XT90 Plug Holder is a small frame-mounted clip or slot that physically locks the XT90 connector into place. Once mounted on the drone, the plug can no longer move or get pulled loose. It provides:
-
A tight grip around the plug
-
Stability even during aggressive flying
-
Protection for the wires and connection points
So, by using this holder, you prevent accidental unplugging, ensure constant power flow, and extend the life of your drone’s electronic components.
✅ How the XT90 Plug Holder Helps
The XT90 Plug Holder is a small but powerful mounting accessory that plays a crucial role in drone safety and performance. Here’s how it works and why it’s important:
🔒 1. Physical Locking Mechanism (Tight Grip Around the Plug):
The plug holder is custom-molded to fit the XT90 connector perfectly. Once the connector is inserted into the holder:
-
It grabs onto the plug body tightly using friction or a snap-lock mechanism.
-
This prevents the plug from sliding out, even if the drone tilts, shakes, or lands hard.
✅ Result: No more loose plugs dangling or slipping out mid-flight.
🌪️ 2. Stability During Aggressive Flying:
When flying fast, doing flips, rolls, or navigating strong winds, drones experience heavy vibrations and G-forces. Without a holder, the XT90 connector might:
-
Wiggle or partially unplug
-
Cause intermittent power delivery
-
Lead to sudden power failures
With the holder:
-
The connector is anchored firmly to the drone frame
-
It doesn’t shake, shift, or bounce, no matter the movement
🛠️ Result: Your drone remains stable and powered, even in tough flight conditions.
🛡️ 3. Protection for Wires and Connection Points:
Cables hanging loosely can be pulled, bent, or damaged—especially during battery swaps or crashes. The XT90 holder:
-
Secures the connector at a fixed point, reducing strain on the wires
-
Prevents twisting or bending at the solder joint
-
Keeps connectors away from moving parts like props or arms
🔧 Result: Longer lifespan for wires, no accidental unplugging, and safer power delivery.
✅ Overall Benefits of Using an XT90 Plug Holder:
By integrating the XT90 plug into the frame using this holder:
-
You prevent accidental disconnection
-
You ensure stable power delivery throughout the flight
-
You protect your drone’s electronic components from wear and damage
-
You maintain a clean and professional drone build
🔍 Key Features
✅ Universal Compatibility
What it means:
This XT90 Plug Holder is designed to work with any type of drone frame, including:-
Carbon fiber frames (commonly used in FPV drones for strength and low weight)
-
Plastic frames (often found in hobby or beginner drones)
-
Custom 3D-printed frames (used in prototyping and experimental builds)
Why it matters:
No matter what drone setup you’re using, this holder will fit without requiring special tools, adapters, or redesigns. It’s a “one-size-fits-all” solution, perfect for:-
DIY drone makers
-
Students
-
Professionals in drone repair shops
✅ Durable, Lightweight Material
What it means:
Made from high-strength plastic, this holder is both rugged and lightweight. It can:-
Withstand heavy vibrations
-
Survive rough landings or crashes
-
Tolerate outdoor weather conditions (like heat or light rain)
Why it matters:
-
Your drone stays light and agile (no unnecessary weight added)
-
The holder won’t crack, warp, or degrade over time
-
You can confidently use it for outdoor or high-speed flying
✅ Precision Fit for XT90 Connectors
What it means:
The holder is specially molded to perfectly match the shape of XT90 connectors (a popular battery plug for high-current drone systems). It:-
Grips the XT90 body tightly
-
Doesn’t crush or twist the plug
-
Keeps wires from bending at sharp angles
Why it matters:
A snug fit means:-
No wiggling = no chance of unplugging mid-flight
-
Protects the connection and wire solder points from damage
-
Ensures consistent, reliable power delivery
✅ Quick and Flexible Installation
What it means:
The holder includes pre-drilled holes, allowing you to attach it to the drone frame using:-
Small screws (for permanent or semi-permanent mounting)
-
Zip ties (for fast, tool-free mounting)
It can also be mounted:
-
Horizontally – flat against a surface
-
Vertically – standing edge-up, depending on space and design
Why it matters:
-
Saves time during build or repair
-
Adapts to any drone layout or battery orientation
-
No need for special tools or adhesives
✅ Clean & Professional Appearance
What it means:
When installed, the holder:-
Organizes the XT90 plug into a fixed position
-
Hides messy wires
-
Matches your drone’s layout for a neat and structured build
Why it matters:
-
Makes maintenance easier (you know exactly where everything is)
-
Reduces chances of wire snags, stress, or damage
-
Gives your drone a professional, reliable look—important for commercial or competition use.
🧩 Product Description (with Internal Link)
Secure your XT90 connectors with the XT90 Plug Holder for Drones, designed to provide a firm grip and prevent mid-air disconnection. Ideal for all drone frames—FPV, DIY, or commercial builds.
🔧 Learn About XT90 (with External DoFollow Link)
Want to understand the XT90 connector standard?
Check out this detailed resource from the original manufacturer:
👉 XT90 Connector Overview – Amass🔗 Related Products (with Internal Links)
Pair your XT90 Plug Holder with our:
📘 Help & Guides (with Internal Link)
Need step-by-step instructions?
Read our XT90 Plug Holder Installation Guide for easy setup.✅ Overall Benefits of Using an XT90 Plug Holder
🔒 1. You Prevent Accidental Disconnection
What it means:
The XT90 Plug Holder firmly locks your battery connector into place. Without a holder, the plug could:-
Loosen due to vibrations
-
Slip out from sudden movements
-
Be accidentally pulled during flight or while handling
Why it matters:
A disconnected power cable mid-flight causes:-
Sudden motor shutdown
-
Complete drone crash
-
Possible damage to expensive parts (frame, camera, ESC)
By using the holder, you keep the plug fixed and secure, preventing such incidents.
⚡ 2. You Ensure Stable Power Delivery Throughout the Flight
What it means:
The XT90 connector is responsible for delivering all power from the battery to the drone’s components. A loose or wobbly connection:-
Causes intermittent power flow
-
May lead to voltage drops, which can crash your flight controller or video system
Why it matters:
-
Consistent power = reliable flight control
-
Prevents mid-air resets of electronic components
-
Keeps your drone performing smoothly, especially in high-speed or long-distance flights
The holder maintains a stable, uninterrupted electrical connection.
🛡️ 3. You Protect Your Drone’s Electronic Components from Wear and Damage
What it means:
Without a holder, the plug and its wires are often hanging freely. This can lead to:-
Wire fatigue from constant bending
-
Strain on solder joints
-
Accidental tugs when swapping batteries
Why it matters:
Over time, this weakens your drone’s power system and could lead to:-
Broken solder joints
-
Short circuits
-
Burnt connectors
The plug holder reduces movement and stress on the plug, making your drone last longer and stay safer.
🧼 4. You Maintain a Clean and Professional Drone Build
What it means:
Mounting the XT90 connector with a holder:-
Keeps wires from dangling
-
Keeps everything aligned and neat
-
Makes your drone look professionally built
Why it matters:
-
Makes battery swaps quicker and cleaner
-
Easier to perform maintenance and inspections
-
Ideal for showcasing your drone in competitions or commercial demos
This adds credibility to your drone design and improves the build’s usability and presentation.
-
📦 What’s in the Box
✅ 1 × XT90 Plug Holder
What XT90 Plug Holder is:
This is the main component of the package—a custom-molded holder designed to secure an XT90 connector to your drone frame. It’s made from durable, lightweight plastic engineered to resist flight vibration and impact.
Key Features:
-
Precision fit for XT90 connectors
-
Universal mounting holes for flexible positioning
-
Heat- and weather-resistant material for outdoor use
-
Compatible with both male and female XT90 connectors
WhyXT90 Plug Holder matters:
This holder is the core accessory that keeps your XT90 plug from moving, unplugging, or damaging the drone’s internal electronics. It’s designed to be reusable and long-lasting.
✅ Mounting Accessories (variant-dependent: screws or zip ties)
What XT90 Plug Holder is:
To attach the XT90 Plug Holder to your drone, mounting accessories are included based on the variant purchased:
-
Some packages include small screws for a more permanent, sturdy install.
-
Others include nylon zip ties for quick, tool-free installation and easy removal.
Why it matters:
-
Screws offer a strong, vibration-resistant fit—ideal for professional or high-performance drones.
-
Zip ties allow for faster installs and are perfect for testing, DIY builds, or quick replacements.
📌 Note: Some sellers or kits may give the buyer a choice, while others come with just one option. Always check the variant description when ordering.
🎯 Summary for Buyers:
When you open the box, you get:
-
1 high-quality XT90 Plug Holder designed to protect and secure your drone’s power system.
-
Mounting hardware to suit your installation needs, either permanent or temporary.
This keeps your installation simple, convenient, and ready to use right out of the package.
📌 Perfect For
🚁 FPV Drone Builders
WhyXT90 Plug Holder perfect:
FPV (First Person View) drones are built for speed, agility, and tight maneuvers, which means:
-
They experience high vibrations
-
Need secure wiring to avoid mid-air failures
-
Are frequently disassembled for maintenance or upgrades
Benefit:
The XT90 Plug Holder ensures the battery connector stays locked during aggressive flight, reducing risk of disconnection or wire fatigue. It also supports quick rebuilds or part swaps.
🛠️ DIY UAV Projects
Why XT90 Plug Holder perfect:
If you’re building a custom drone or unmanned aerial vehicle (UAV) for personal, academic, or experimental use, you likely:
-
Use various frame materials and sizes
-
Test and tweak your designs often
-
Need a flexible, universal connector solution
Benefit:
This holder is universally compatible with different frame types and layouts. It’s easy to install and reposition, making it ideal for evolving DIY projects and prototypes.
👨🔧 Professional Drone Technicians
Why XT90 Plug Holder perfect:
Technicians building or repairing drones for clients, institutions, or industries prioritize:
-
Reliability
-
Consistent performance
-
Clean, organized builds
Benefit:
The XT90 Plug Holder adds a professional touch to the drone setup, ensures secure power delivery, and helps prevent future electrical issues—reducing customer complaints and repeat repairs.
🎥 Aerial Cinematographers
Why XT90 Plug Holder perfect:
Drones used for filming need:
-
Stable power to avoid system glitches during shots
-
Clean and organized layouts to avoid interference with gimbals or sensors
Benefit:
With the XT90 Plug Holder, power remains uninterrupted throughout the shoot. It also keeps the rig neat, preventing wires from obstructing the camera or adding noise to video footage.
🎮 Hobbyists Looking to Improve Drone Safety and Wiring
Why XT90 Plug Holder perfect:
Drone enthusiasts often upgrade their builds to:
-
Improve durability
-
Reduce crash damage
-
Make wiring neat and easier to manage
Benefit:
This plug holder helps hobbyists organize their wiring, reduce wire wear, and prevent unexpected disconnects—making flights smoother and drones more reliable.
Detailed Benefits of Using an XT90 Plug Holder
🔐 1. Enhanced Safety
🔧 Problem Without It:
XT90 connectors are responsible for transferring all battery power to the drone’s motors and electronics. If the plug becomes loose or disconnects mid-flight due to vibration or sudden motion, your drone will instantly lose power and fall.
🛠️ How the Holder Solves It:
-
The XT90 Plug Holder physically locks the connector onto the drone frame.
-
Prevents mid-air disconnection even during aggressive maneuvers, crashes, or hard landings.
-
Keeps wires secured and out of propeller range, reducing accident risk.
✅ Result:
Protects your drone, environment, and people from crashes due to power failure. A must-have for safe flying, especially in FPV racing or high-risk environments.
⚡ 2. Stable Power Delivery
🔧 Problem Without It:
Without a stable plug connection, tiny movements or vibrations can cause the plug to shake, resulting in:
-
Voltage fluctuations
-
Sudden resets of the flight controller or ESC
-
Loss of GPS or FPV signal
🛠️ How the Holder Solves It:
-
Maintains a firm, fixed connection between the battery and electronics.
-
Ensures consistent current flow with no interruptions.
-
Reduces risk of data loss or sudden power drops mid-flight.
✅ Result:
Reliable drone behavior from takeoff to landing. Crucial for aerial cinematography, GPS missions, or long-range flights where consistency matters.
🛡️ 3. Wire & Connector Protection
🔧 Problem Without It:
Loose wires and connectors can:
-
Rub against sharp edges
-
Bend repeatedly at the solder joint
-
Get pulled during battery changes
-
Suffer premature wear or heat damage
🛠️ How the Holder Solves It:
-
Anchors the XT90 plug to the frame, eliminating stress on wires and joints.
-
Prevents excessive flexing or pulling of wires.
-
Keeps cables in one fixed position, reducing wear and improving safety.
✅ Result:
Extended life of your wiring and connectors. Less repair time, more flight time.
🧼 4. Clean & Professional Drone Build
🔧 Problem Without It:
Wires hanging loosely from the drone can:
-
Get caught in moving parts
-
Look unorganized and unprofessional
-
Make battery swaps messy and time-consuming
🛠️ How the Holder Solves It:
-
Offers a tidy, integrated mounting solution for your power plug.
-
Makes the drone easier to inspect, maintain, and present to clients or judges.
-
Improves airflow and layout by keeping the connector flush with the frame.
✅ Result:
A neat, reliable, and aesthetic drone setup—ideal for competitive events, professional filming jobs, and high-performance builds.
📊 Benefits Table for Quick Reference:
🏆 Benefit | ❌ Without Holder | ✅ With XT90 Plug Holder |
---|---|---|
Safety | Loose plugs, risk of crashes | Secure connection, prevents mid-air disconnection |
Power Stability | Voltage drops, resets, inconsistent power | Stable, continuous power flow to all electronics |
Wire & Plug Protection | Wire damage, broken joints, frequent repairs | Reduced stress on cables, increased lifespan |
Professional Build | Cluttered wiring, poor airflow, unprofessional appearance | Clean layout, easier maintenance, ready for commercial use |
🧩 Final Thought:
The XT90 Plug Holder is a small investment that delivers huge improvements in safety, reliability, and build quality. Whether you’re a beginner or a pro, this tool transforms your drone from “just working” to professionally built and ready for anything.
🔧 XT90 Plug Holder – Detailed Technical Specifications
🧱 Product Name
XT90 Plug Holder for Drones
This is a specialized component designed to hold XT90 connectors securely on drone frames. It’s especially useful in builds that require safe, stable power delivery and clean wiring.
🔌 Connector Compatibility
XT90 Male & Female Connectors (Standard Size)
Designed to precisely fit standard XT90 plugs used in most LiPo battery setups. Both male and female connectors can be held by the frame-mounted holder, ensuring compatibility across various battery wiring styles.
🧪 Material
High-Density Nylon / ABS Plastic (based on variant)
-
Nylon: Tough, flexible, vibration-resistant — ideal for rugged outdoor or racing drones
-
ABS: Lightweight, cost-effective, and impact-resistant
These plastics are commonly used in drone components because of their strength-to-weight ratio and resistance to wear.
🎨 Color
Black (default); custom colors available on request
Black provides a neutral, professional look and blends well with most drone frames. For bulk or branded orders, manufacturers may offer custom color options.
🔩 Mounting Method
Screw Mount / Zip Tie Mount (variant dependent)
-
Screws: Permanent, strong attachment—suitable for harsh flying conditions
-
Zip Ties: Quick, adjustable, and tool-free installation—ideal for DIY or test builds
↕️ Mounting Orientation
Horizontal or Vertical
Designed with multiple mounting points so the holder can be mounted flat or upright, depending on your drone’s layout. This allows flexibility in tight or uniquely shaped frames.
📏 Hole Size
~3 mm diameter
Sized to work with most standard M2/M3 drone frame screws, making it easy to integrate without needing special tools or drilling.
📐 Dimensions
Approx. 30 mm × 20 mm × 15 mm
Compact size that fits comfortably on mini, 5-inch, or larger drone frames without blocking other components.
⚖️ Weight
~5 grams
Extremely lightweight—important for drones where every gram affects flight time, stability, and maneuverability.
🌡️ Temperature Resistance
-10°C to 90°C
Can handle a wide range of temperatures. Suitable for:
-
Cold-weather flights
-
Hot and sunny environments
-
Prolonged motor heat exposure
🌪️ Vibration Resistance
Yes
The snug fit and durable plastic prevent the XT90 connector from vibrating loose—crucial for FPV racing and aerial acrobatics.
☀️ UV / Weather Resistance
Yes
If made from UV-resistant nylon, the holder won’t easily degrade under sunlight. Weather resistance makes it usable in outdoor conditions, including light rain or humidity.
🧩 Frame Compatibility
Fits carbon fiber, plastic, and 3D-printed drone frames
Designed to work universally across frame types. Can also be mounted onto customized or modular drone designs.
🔄 Reusability
Yes
Strong enough to be removed and re-installed multiple times during upgrades or maintenance without cracking or deforming.
🎯 Use Cases
FPV drones, aerial cinematography, UAV experiments, hobby builds, RC planes, educational kits
Whether you’re a hobbyist, professional, or student, this holder ensures clean power management in any kind of drone project.
📦 Packaging
Includes 1 × XT90 Plug Holder + mounting hardware (zip ties or screws)
Comes ready to install with all needed parts included. The variant will specify whether it includes screws or zip ties.
🌿 Why Choose Agrotech?
At Lofty Agrotech, we’re more than just a drone parts supplier — we’re your trusted partner in building smarter, safer, and more reliable drone systems. Here’s what makes us stand out:
https://loftyagrotech.com/
✅ 1. Industry-Focused Innovation
We specialize in developing precision drone accessories tailored for agriculture, surveying, UAV research, and aerial cinematography. Every product we release is designed with real-world applications and pilot feedback in mind.
✅ 2. Trusted Quality & Reliability
Our components are tested in the field and built to last. Whether it’s an XT90 plug holder or a complete spraying drone system, Agrotech ensures:
-
Durable materials
-
Fit-for-purpose design
-
Long-term performance under extreme conditions
✅ 3. Universal Compatibility
We know every build is unique. That’s why our drone accessories, like the XT90 Plug Holder, are designed to fit all major drone frames—from DIY builds to commercial platforms—so you never have to compromise.
✅ 4. End-to-End Support
We don’t just sell products—we support your entire journey. Our technical team is available to help you:
-
Choose the right accessories
-
Troubleshoot installation issues
-
Customize solutions for special drone setups
✅ 5. India-Based, Globally Minded
Proudly designed and manufactured in India, our products are made to meet global quality standards while remaining affordable and accessible to drone builders across the world.
✅ 6. Fast Shipping & Easy Ordering
With our streamlined website and responsive team, your components are just a click away. We offer:
-
Safe packaging
-
On-time delivery
-
Secure payment options
🔍 Learn More About XT90 Connectors
Before flying, ensure you’re compliant with India’s drone regulations (DGCA DigitalSky Portal).
FOR MORE PRODUCTS VISIT:
Reviews
There are no reviews yet.