Description
WLY603040 3.7V 600mAh 1S LiPo Battery
Introduction to WLY603040 3.7V 600mAh 1S LiPo Battery
The WLY603040 3.7V 600mAh 1S LiPo Battery by NDB&C from LOFTY AGROTECH is a cutting-edge, single-cell lithium polymer battery designed for modern electronic applications. With its compact form factor and high energy density, this battery delivers reliable and long-lasting power for wearables, micro drones, IoT devices, DIY electronics, and embedded systems.
In an era where devices are becoming smaller and more intelligent, the WLY603040 3.7V 600mAh 1S LiPo Battery ensures that performance does not compromise portability. Its lightweight design, stable voltage output, and rechargeable capability make it a versatile solution for engineers, hobbyists, and manufacturers.
Key Features of the WLY603040 3.7V 600mAh 1S LiPo Battery
High-Capacity Power
The WLY603040 3.7V 600mAh 1S LiPo Battery provides a substantial 600mAh capacity, offering extended device runtime. This high-capacity design is essential for devices requiring consistent energy over long periods, reducing the frequency of recharges and ensuring smooth operation in portable electronics and IoT devices.
Stable Voltage Output
Maintaining a stable 3.7V output, this battery ensures that connected devices perform reliably without voltage drops that could disrupt microcontrollers, sensors, or communication modules. The consistent voltage also protects sensitive electronics from unexpected shutdowns or malfunctions.
Compact and Lightweight Design
Weighing only 13 grams and measuring 6mm × 30mm × 40mm, the WLY603040 3.7V 600mAh 1S LiPo Battery fits seamlessly into small enclosures, wearables, and micro drones. Its slim profile allows engineers to design sleek, space-efficient devices without compromising battery performance.
Rechargeable and Eco-Friendly
This LiPo battery supports over 300 recharge cycles at standard conditions, significantly reducing waste compared to disposable batteries. Its rechargeable nature not only offers cost savings but also aligns with eco-friendly practices, making it suitable for sustainable electronics design.
Versatile Applications
The WLY603040 3.7V 600mAh 1S LiPo Battery is ideal for a wide range of applications:
- Wearables: Smart bands, fitness trackers, and health monitoring devices
- Micro drones: Flight controllers, FPV systems, and telemetry modules
- IoT devices: Sensors, trackers, and environmental monitors
- DIY electronics: Arduino, ESP32, and Raspberry Pi projects
- Embedded systems: Small controllers, automation modules, and portable instruments
Technical Specifications of WLY603040 3.7V 600mAh 1S LiPo Battery
| Specification | Details |
|---|---|
| Model No. | WLY603040 |
| Nominal Voltage | 3.7 V |
| Nominal Capacity | 600 mAh |
| Continuous Charge Current | 0.5C |
| Continuous Discharge Current | 0.5C |
| Maximum Charge Rate | 1C |
| Maximum Discharge Rate | 1C |
| Connector Type | Open Wire |
| Life Cycles | ≥300 cycles (0.5C to 2.75V, <80%) |
| Application | Wearables / Micro Drone / IoT / Embedded Systems |
| Thickness | 6 mm |
| Breadth | 30 mm |
| Length | 40 mm |
| Max Size (with PCB) | 6 × 30 × 42.5 mm |
| Weight | 13 g |
The detailed specifications of the WLY603040 3.7V 600mAh 1S LiPo Battery make it suitable for diverse projects while maintaining a balance between energy capacity and compact design.
Why Choose WLY603040 3.7V 600mAh 1S LiPo Battery?
Reliable Performance
The WLY603040 3.7V 600mAh 1S LiPo Battery ensures a consistent power supply, which is crucial for precision electronics such as microcontrollers, wireless sensors, and portable instruments. The battery’s low internal resistance minimizes energy loss during operation, improving efficiency and extending device runtime.
Lightweight Advantage
In applications like micro drones, every gram affects flight performance. The 13-gram WLY603040 3.7V 600mAh 1S LiPo Battery ensures minimal impact on weight while delivering sufficient power for motors, sensors, and controllers. Its lightweight profile also enhances comfort in wearable devices.
Long Cycle Life
Designed to withstand over 300 charge cycles, this battery retains more than 80% of its capacity over time. Its longevity reduces the frequency of replacements, saving costs and reducing environmental impact.
Eco-Friendly Solution
By using a rechargeable LiPo battery instead of disposable alternatives, the WLY603040 3.7V 600mAh 1S LiPo Battery supports sustainable electronics practices. Its polymer-based design avoids harmful heavy metals and reduces electronic waste.
Versatile and Adaptable
Thanks to its open-wire connector design, the battery can be integrated into a variety of devices. Whether for custom DIY projects, OEM applications, or advanced IoT systems, this LiPo battery adapts easily, simplifying assembly and reducing design constraints.
Applications in Wearable Technology
Smart Wearables
The WLY603040 3.7V 600mAh 1S LiPo Battery is perfect for wearable electronics that demand lightweight and reliable energy sources. Devices like fitness bands, smartwatches, and health trackers benefit from the stable voltage and compact design, enabling extended monitoring without frequent recharges.
Medical Monitoring Devices
Portable medical devices such as glucose monitors or ECG patches require precise voltage control to ensure accurate readings. The WLY603040 3.7V 600mAh 1S LiPo Battery provides consistent power, safeguarding measurement reliability and patient safety.
Applications in Micro Drones and RC Devices
Micro Drones
Flight controllers, FPV cameras, and telemetry systems rely on stable voltage for smooth operation. The WLY603040 3.7V 600mAh 1S LiPo Battery delivers consistent output, allowing micro drones to maintain optimal flight performance and sensor accuracy.
RC Devices
For remote-controlled devices, battery weight and output stability are crucial. The WLY603040 3.7V 600mAh 1S LiPo Battery ensures long run times without adding significant weight, supporting efficient maneuverability and reliability.
Applications in IoT Devices
The WLY603040 3.7V 600mAh 1S LiPo Battery is ideal for IoT applications that require long-term operation with minimal maintenance. Environmental sensors, smart home modules, and wireless data transmitters benefit from its stable 3.7V output and low self-discharge, ensuring consistent connectivity and data accuracy.
Applications in DIY Electronics and Embedded Systems
For hobbyists and engineers, the WLY603040 3.7V 600mAh 1S LiPo Battery provides a reliable power source for Arduino, ESP32, Raspberry Pi, and other embedded projects. Its compact form factor allows creative freedom, while the rechargeable nature reduces recurring costs for prototype testing and development.
Electrical Performance of WLY603040 3.7V 600mAh 1S LiPo Battery
The WLY603040 3.7V 600mAh 1S LiPo Battery is engineered for both consistent energy delivery and high efficiency. Its low internal resistance ensures minimal voltage drop during peak loads, making it ideal for micro drones, wearables, and IoT devices that experience sudden current demands.
Discharge Characteristics
The battery maintains a flat discharge curve from full charge (4.2V) down to its cut-off voltage (2.75V). Even under a 1C discharge load (0.6A), the voltage remains stable, preventing device resets or performance degradation. This characteristic makes it highly suitable for applications requiring uninterrupted power.
Internal Resistance and Efficiency
With an internal resistance averaging below 90 milliohms, the WLY603040 3.7V 600mAh 1S LiPo Battery minimizes heat generation and energy loss during operation. This allows devices to run longer while maintaining a compact form factor, a crucial advantage for small wearables and lightweight drones.
Thermal and Environmental Performance
Temperature Tolerance
The WLY603040 3.7V 600mAh 1S LiPo Battery operates effectively between -20°C and +60°C. Its polymer casing ensures safe operation under varying environmental conditions, making it suitable for outdoor IoT sensors, drone flights in moderate cold or heat, and portable wearable devices.
Heat Dissipation
Even during high-load operations, the battery disperses heat effectively. This prevents swelling, maintains internal stability, and protects connected electronics. Its design ensures that temperature fluctuations do not compromise voltage stability or cycle life.
Charging Guidelines for WLY603040 3.7V 600mAh 1S LiPo Battery
Proper charging is essential to maximize both performance and lifespan.
Recommended Charging Parameters
- Charger Type: CC/CV LiPo charger
- Standard Charge Rate: 0.5C (~0.3A)
- Maximum Charge Rate: 1C (~0.6A)
- Cut-off Voltage: 4.2V ± 0.05V
- Temperature Range: 0°C – 45°C
Using a CC/CV LiPo charger ensures safety and prevents overcharging. Overcharging above 4.25V can reduce cycle life or cause thermal stress, while charging at the recommended 0.5C maintains battery health.
Safety Features
Although a single-cell battery, integrating a PCM or BMS module provides protection against over-current, over-discharge, and short circuits. These safeguards are especially useful in drones, IoT modules, and DIY electronics where current surges are common.
Storage and Maintenance of WLY603040 3.7V 600mAh 1S LiPo Battery
Proper storage practices are vital for long-term reliability.
Storage Guidelines
- Keep the battery at 40–60% state of charge (~3.75V).
- Avoid direct sunlight and temperatures above 50°C.
- Recharge every three months if stored idle.
- Avoid storing fully discharged (<3.0V) or fully charged (>4.0V) for prolonged periods.
Maintenance Tips
- Inspect for swelling or physical damage regularly.
- Check connectors for corrosion or wear.
- Cycle the battery occasionally to maintain optimal capacity.
- Avoid extreme vibration or mechanical stress during installation.
These practices extend the life of the WLY603040 3.7V 600mAh 1S LiPo Battery and maintain stable performance over hundreds of cycles.
Handling and Safety Precautions
While the WLY603040 3.7V 600mAh 1S LiPo Battery is engineered for safety, responsible handling is essential:
- Do not puncture or bend the battery.
- Avoid short-circuiting terminals.
- Keep away from water, fire, or extreme heat.
- Use only LiPo-compatible chargers.
- Dispose of spent batteries at certified e-waste facilities.
LOFTY AGROTECH tests every battery for drop, crush, vibration, and thermal resilience to ensure reliability and safety under typical operating conditions.
Applications in Extreme Environments
The WLY603040 3.7V 600mAh 1S LiPo Battery excels in challenging applications:
Outdoor IoT Devices
Environmental sensors, smart trackers, and agricultural monitors benefit from the battery’s stable voltage and low self-discharge, even under fluctuating temperatures and humidity.
Drone and FPV Racing
Its lightweight design reduces payload, while consistent energy output supports high-performance flight and camera systems. The battery’s ability to deliver 1C peak current ensures smooth operation during acceleration and maneuvering.
Portable Medical Devices
Handheld health monitors require precise voltage for accurate readings. The WLY603040 3.7V 600mAh 1S LiPo Battery maintains output stability, ensuring reliable medical data collection.
Comparative Advantages Over Other LiPo Cells
| Model | Voltage | Capacity | Weight | Use Case |
|---|---|---|---|---|
| WLY602540 | 3.7V | 600mAh | 13g | Wearables / IoT / Micro Drone |
| WLY603040 | 3.7V | 600mAh | 13g | Compact Micro Drone / IoT / DIY Projects |
| WLY703450 | 3.7V | 1000mAh | 20g | Larger RC Devices |
The WLY603040 3.7V 600mAh 1S LiPo Battery offers the ideal balance between compact size, lightweight construction, and long-lasting performance. Compared to similar-capacity batteries, it delivers superior stability and adaptability for small devices, wearables, and micro drones.
Integration Tips for OEMs and DIY Projects
When embedding the WLY603040 3.7V 600mAh 1S LiPo Battery into your devices:
- Use soft padding or foam to protect against vibration.
- Maintain ~1mm air gap for natural expansion.
- Route wires away from heat-emitting components.
- Include PCM/BMS for added safety.
Proper integration ensures maximum battery longevity and device reliability.
FAQs about WLY603040 3.7V 600mAh 1S LiPo Battery
Q1: Can this battery power a micro drone continuously?
A: Yes, it is designed to support micro drones, delivering stable voltage and sufficient current for flight systems.
Q2: How many cycles can I expect?
A: Over 300 cycles at 0.5C discharge while retaining ≥80% capacity.
Q3: Is it suitable for wearable devices?
A: Absolutely. Its compact and lightweight design makes it perfect for smart bands and health trackers.
Q4: Can I fast-charge it?
A: Yes, up to 1C max, but frequent fast charging may reduce overall cycle life.
Q5: How should I dispose of it safely?
A: Follow certified e-waste disposal regulations to prevent environmental hazards.
Long-Term Usage Strategies for WLY603040 3.7V 600mAh 1S LiPo Battery
To maximize the lifespan of the WLY603040 3.7V 600mAh 1S LiPo Battery, proper usage strategies are essential. Over time, even high-quality LiPo cells experience capacity reduction if not managed carefully.
Optimal Charge-Discharge Practices
- Maintain discharge rates below 0.5C for standard operation.
- Avoid fully discharging the battery below 2.75V; partial discharges extend cycle life.
- Use constant current/constant voltage (CC/CV) chargers at recommended rates.
Avoiding Overheating
High temperatures accelerate chemical degradation. During intensive applications, such as micro drone flight or IoT sensor bursts, ensure adequate airflow or thermal management to maintain battery temperature within -20°C to +60°C.
Rotation for Multiple Devices
For users operating several devices, rotate batteries to avoid overusing a single cell. The WLY603040 3.7V 600mAh 1S LiPo Battery maintains consistent performance even in high-duty cycles if proper rotation and rest periods are observed.
Troubleshooting Common Issues
Even with careful use, some operational issues may arise. Understanding potential problems allows users to mitigate them effectively.
Rapid Voltage Drop
Cause: High load or aging cell.
Solution: Ensure device load does not exceed 1C discharge. Replace the battery if capacity drops below 80% after 300 cycles.
Swelling or Puffing
Cause: Overcharge, high temperature, or aging.
Solution: Immediately cease use. Dispose of safely and replace with a new WLY603040 3.7V 600mAh 1S LiPo Battery.
Battery Not Recognized by Charger
Cause: Loose connections, damaged wires, or incorrect charger type.
Solution: Verify connections, use a CC/CV LiPo charger, and inspect for shorts.
Reduced Runtime
Cause: Low cycle efficiency, extreme temperature, or aging.
Solution: Cycle fully at 0.5C, store correctly, and avoid operation below -20°C.
Maintenance and Care
Regular maintenance ensures optimal performance for the WLY603040 3.7V 600mAh 1S LiPo Battery:
- Voltage Monitoring: Periodically check the open-circuit voltage to detect capacity loss early.
- Connector Check: Inspect terminals and wires for corrosion or damage.
- Storage: Maintain 40–60% charge when idle and recharge every three months.
- Environmental Care: Avoid storing near high-vibration sources or heat-emitting components.
Field Deployment Examples
IoT Sensor Networks
The WLY603040 3.7V 600mAh 1S LiPo Battery powers remote IoT nodes in agricultural, environmental, or smart city applications. Its stable voltage ensures accurate data collection, while low self-discharge allows months of operation without maintenance.
Wearables
Smart bands and portable health monitors benefit from extended runtime and consistent power, reducing the need for frequent recharging. The lightweight design ensures comfort for end-users while maintaining device performance.
Micro Drones
Flight controllers, telemetry systems, and micro cameras rely on uninterrupted power for safe operation. The WLY603040 3.7V 600mAh 1S LiPo Battery delivers peak performance during rapid accelerations and maintains stable voltage throughout flight cycles.
DIY Electronics Projects
Arduino, ESP32, and Raspberry Pi projects can be powered reliably, allowing hobbyists and engineers to test prototypes without worrying about sudden voltage drops or limited runtime.
Comparisons with Other Batteries
Compared to similar LiPo batteries, the WLY603040 3.7V 600mAh 1S LiPo Battery stands out for its combination of compact size, lightweight, and reliable output.
| Model | Capacity | Weight | Applications |
|---|---|---|---|
| WLY602540 | 600mAh | 13g | Wearables, Micro Drones |
| WLY603040 | 600mAh | 13g | IoT, DIY Electronics, Micro Drones |
| WLY703450 | 1000mAh | 20g | Larger RC Devices |
Its balance between size, power, and weight makes it the preferred choice for applications requiring compact, long-lasting, and stable energy sources.
Economic and Environmental Benefits
The rechargeable nature of the WLY603040 3.7V 600mAh 1S LiPo Battery reduces the need for disposable batteries, lowering costs and environmental impact. Over 300 cycles, a single battery can replace hundreds of single-use cells, making it a sustainable and cost-effective solution.
NDB&C by LOFTY AGROTECH ensures compliance with RoHS and REACH standards, guaranteeing environmentally safe materials and responsible manufacturing practices.
Integration Tips for Manufacturers and Hobbyists
- Secure Mounting: Use foam or padding to protect the battery from vibration.
- Allow Expansion: Maintain a 1–2mm gap to accommodate natural polymer expansion.
- Wire Routing: Keep leads away from heat sources and moving parts.
- Use Protection Circuits: PCM or BMS circuits prevent overcharge, over-discharge, and short circuits.
These practices ensure that the WLY603040 3.7V 600mAh 1S LiPo Battery operates safely and efficiently in various devices.
Final Recommendations
The WLY603040 3.7V 600mAh 1S LiPo Battery by NDB&C from LOFTY AGROTECH is an ideal choice for engineers, hobbyists, and manufacturers who require compact, reliable, and eco-friendly energy solutions.
Key advantages include:
- Stable 3.7V output for sensitive electronics
- 600mAh capacity in a lightweight 13g form factor
- Compact dimensions (6 × 30 × 40mm)
- Over 300 recharge cycles for long-term use
- Open-wire connectors for versatile integration
- Eco-friendly design compliant with environmental standards
Whether powering wearables, micro drones, IoT devices, or DIY electronics, the WLY603040 3.7V 600mAh 1S LiPo Battery ensures consistent performance, extended runtime, and safe operation.
Link
In stock now. Limited quantities available. Ships within 24 hours.
LOOKING FOR MORE? DISCOVER EVERYTHING WITH OFFER AT http://www.loftyagrotech.com
Explore more in our camera drone collection and find the right aerial companion.
Before flying, ensure you’re compliant with India’s drone regulations (DGCA DigitalSky Portal).
Reviews
There are no reviews yet.