Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C

This is Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C. The MD10C is a newer version of the MD10B which is designed to drive high current brushed DC motor up to 10A 13A continuously. It offers several enhancements over the MD10B such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay. Note: The MD10C is now upgraded to Rev 3.0. Rev 3.0 can support motor voltage range from 5V to 30V. Working with MD10C R3 is as easy as pressing buttons, everyone can do it! Features: Bi-directional control of 1 brushed DC motor, single channel. Support motor voltage ranges from 5V to 30V. Maximum current up to 13A continuous and 30A peak (10 seconds). 3.3V and 5V logic level input. Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay. Fully NMOS H-Bridge for better efficiency and no heat sink is required. Speed control PWM frequency up to 20KHz (Actual output frequency is the same as input frequency). Support both locked-antiphase and sign-magnitude PWM operation. The new MD10C can be powered from a single power source, the Vmotor only. No external Vin is not required. Support TTL PWM from microcontroller. Package includes: 1 x Cytron Enhanced 13Amp DC Motor Driver 30A peak MD10C Rev 3.01 x 2510 PCB Connector - 3 Ways (Female)1 x 2510 Terminal Pin4 x Plastic spacer (~7mm) Useful Links: MD10C Fast Testing PSC28A – Controlling MD10C and MDS40A SK40C PIC16F887 project 10 - Driving one DC brush-motor with MD10C SK40C PIC16F887 project 16 - Driving two DC brush-motor with MD10C by using SKPS Controlling MD10C with Arduino, Signed-Magnitude and Locked Anti-phase method

Specifications

Item Type:	Motor Driver
Model Series:	MD Series
Voltage Rating (V):	5 to 30
Current Rating (A):	13 to 30
Model No. / Name:	MD10C
Operating Voltage (VDC):	5 to 30
Peak Current (A)	30
Continuous Discharge Current (A)	13
Operating Mode	PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
Arduino Shield (Y/N):	No, can be used with Wire connection
No. of Channels:	1
Battery Protect. Mode (Y/N)	Yes
LED Indicator	Yes
Cooling Fan	No
Test/Manual Button (Y/N)	Yes
Polarity Protection (Y/N):	NO
Dimensions (L x W x H) mm	75x43x13
Weight (g):	22
Shipping Weight	0.025 kg
Shipping Dimensions	9 × 5.5 × 2.5 cm