Geekworm X1003 PCIe to M.2 Key-M NVMe SSD PIP TOP for Raspberry Pi 5

The X1003 is a PCIE to NVME expansion board designed to support Raspberry Pi 5 Active Cooler and the official Raspberry Pi 5 ABS case, it is very compact in size and only supports NVME ssd's of the 2230/2242 specification, in order to install the X1003 you will need to remove the fan layer on the top of the enclosure. Notes: Compatible with M.2 NVMe SSDs Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices Older NVMe drives with less efficient flash media may not perform as well as newer drives New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. Note : Raspberry Pi Board is Not Included. Features: Compatible with Raspberry Pi 5 Active Cooler and Raspberry pi 5 official case ; FFC is only 22mm length. Supports installation of official active coolers also; With M.2 disk activity (“ACT”) LED; On: Power OK/Standby,Flashing: Reading/Writing Supports 2230/2242 NVME M2 SSD only. Supports additional GPIO power supply in addition to FPC power supply PS: The X1003 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS Package Includes: 1 x X1003 V1.3 NVMe SSD Shield1 x PCIe FFC cable(22mm length)1 x M2x13mm screw (fix x1003 shield to official Active cooler)1 x M2x4mm Screws (to fix MVME M2 SSD)

Specifications

Model	X1003
Compatible with	Raspberry Pi 5
Position	Top
NVMe M2 SSD Length Support	2230/2242
Matching Case	P579 / P425
Matching Cooler	Official Cooler / H501 Only
Support NVMe Boot	Yes
Support Hailo-8 AI Accelerator	Not tested
Item Type:	Peripherel Board
Compatibility:	Pi 5
Model No. / Name:	X1003
No. of Positions:	Top
Interface:	PCIe Gen 2 x1
Installation Type	Plug-and-Play, no additional drivers required
Shipping Weight	0.022 kg
Shipping Dimensions	8.5 × 5 × 2 cm