The NANO32 ESP32 IoT Development Board is the product by the designers of Arduino Nano and Espresso Lite (Thailand-based Gravitech and MakerAsia respectively) is the first third-party development board that provides another alternative to the eager-beavers community of geeks, makers, hackers and developers interested in the latest Wi-Fi/BT combo 'wonder' chip.This NANO32 ESP32 IoT Development Board is the big brother of the ESP8266 development board. Nano32 is collaboration work by Makerasia and Gravitech from Thailand. It is base on ESP32 SoC. ESP32 the flagship product from Espressif (the company that design and produce ESP8266), but now with Xsensa Dual-Core 32-bit processors that case provides 600DMPIS. Let's look at the features and Specification of this board.The ESP32 is the latest chipset to be released by Shanghai-based, Espressif Systems that combines both Wi-Fi and Bluetooth (BT) capabilities within its dual CPU core and a rich accompaniment of hardware peripherals.Designed as an ultra-low power chip using TSMC 40nm technology, it employs a customized CPU design based on the Cadence® Tensilica® Xtensa® Dual-Core 32-bit LX6 600 DMIPS.Specifications and Features:ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE40MHz Crystal for CPU, 32.768KHz for RTC and low power operation4MB Flash (32MBit)FTDI231 for the USB to Serial communicationAuto-reset for an automatic flash of the new programOnboard 3.3V, 0.5A LDO tested to work up to 1A2.5dBi Peak Gain, 0.5dBi average gain antennaKey Features of ESP32 SoC:Xtensa® Dual-Core 32-bit LX6 microprocessors, up to 600 DMIPSIntegrated 520 KB SRAMIntegrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack and LWIPIntegrated dual mode Bluetooth (classic and BLE)4 MByte flash (32Mbit)2.2V to 3.6V operating voltage-40°C to +125°C operating temperature32 GPIOESP32 Wi-Fi : 802.11 b/g/n/e/i802.11 n (2.4 GHz), up to 150 Mbps802.11 e: QoS for wireless multimedia technologyWMM-PS, UAPSDA-MPDU and A-MSDU aggregationBlock ACKFragmentation and defragmentationAutomatic Beacon monitoring/scanning802.11 i security features: pre-authentication and TSNWi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)Infrastructure BSS Station mode/SoftAP modeWi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2PPower ManagementUMA compliant and certifiedAntenna diversity and selectionESP32 Bluetooth :Compliant with Bluetooth v4.2 BR/EDR and BLE specificationClass-1, class-2 and class-3 transmitter r without external power amplifierEnhanced power control+10 dBm transmitting powerNZIF receiver with -98 dBm sensitivityAdaptive Frequency Hopping (AFH)Standard HCI based on SDIO/SPI/UARTHigh speed UART HCI, up to 4 MbpsBT 4.2 controller and host stackService Discover Protocol (SDP)General Access Profile (GAP)Security Manage Protocol (SMP)Bluetooth Low Energy (BLE)ATT/GATTHIDAll GATT-based profile supportedSPP-Like GATT-based profileBLE BeaconA2DP/AVRCP/SPP, HSP/HFP, RFCOMMCVSD and SBC for audio codecBluetooth Piconet and Scatternet GPIO Peripherals :3 x UARTs, including hardware flow control3 x SPI2 x I2S12 x ADC input channels2 x DAC2 x I2CPWM/timer input/output availabe on every GPIO pinOpenOCD debug interface with 32 kB TRAX bufferSDIO master/slave 50 MHzSupports external SPI flash up to 16 MBSD-card interface supportSecurity Related :IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPISecure bootFlash encryption1024-bit OTP, up to 768-bit for customersCryptographic hardware acceleration:AESHASH (SHA-2) libraryRSAECCRandom Number Generator (RNG)Package Includes :1 x NANO32 ESP32 IoT Development Board
Specifications
| Item Type: | ESP32 Based |
|---|
| Length (mm): | 28 |
|---|
| Width (mm): | 54 |
|---|
| Weight (g): | 10 |
|---|
| Shipping Weight | 0.05 kg |
|---|
| Shipping Dimensions | 7 × 3 × 2 cm |
|---|
