Official Raspberry Pi 48W Power Supply for Build HAT + LEGO Motors

The Official Raspberry Pi 48W Power Supply for Build HAT + LEGO Motors is a robust, high-power adapter designed to support both the Build HAT and a connected Raspberry Pi, along with LEGO Technic motors and sensors. This supply takes a wide-range AC input from the mains and converts it to regulated DC power, delivering a stable voltage to drive demanding loads. The power cable is long and thick, ensuring reliable current delivery without significant drop, while the barrel jack connector fits securely into the Build HAT. For safety and durability, the supply includes protection mechanisms such as short-circuit, overcurrent, and overvoltage safeguards. With this adapter, you don’t need a separate Pi power brick when using the Build HAT — it supplies enough current to run the Pi itself and the attached LEGO electronics. The Build HAT Power Supply conforms to international safety standards and has been tested for compliance across multiple regions, making it a dependable choice for both educational and hobbyist robotics or Maker projects. Features: Input: 110-240V AC Output: 8V DC, 6A Cable: 1.5M, 16 awg (Premium Quality) Technical Specifications: Rise time: 100ms maximum to regulatory limits for DC outputs Turn-on delay: 3000ms maximum at nominal input AC voltage and full load Protection: Short circuit protection, Overcurrent protection, Overvoltage protection Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%) Output cable: 1.5m 16AWG Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre Positive Package Includes: 1 x Official Raspberry Pi 48W Power Supply for Build HAT + LEGO Motors

Specifications

Output voltage	+8.0V DC
Minimum load current	0.01A
Nominal load current	6.0A
Maximum power	48.0W
Load regulation	±5%
Line regulation	±5%
Output Voltage:	+8.0V DC
Frequency	50/60Hz ±3Hz
Power consumption (no load)	0.1W maximum
Inrush current	No damage shall occur and the input fuse shall not blow
Max. Power (W)	48.0W
Ripple and Noise	200mVp-p
Shipping Weight	0.21 kg
Shipping Dimensions	10 × 8 × 4 cm