PIMORONI Pirate Audio: Line-out for Raspberry Pi

This board is perfect for upgrading an existing hi-fi amp and speakers, or a set of powered monitors, with digital audio from local audio files (MP3, FLAC, etc.) or from streaming services like Spotify. The DAC on Pirate Audio Line-out gives you crisp 24-bit / 192KHz digital audio through its 3.5mm stereo jack.Pirate Audio is a range of all-in-one audio boards for Raspberry Pi, with high-quality digital audio, beautifully-crisp IPS displays for album art, tactile buttons for playback control, and our custom Pirate Audio software and installer to make setting it all up a breeze.Notes: The DAC can be configured by adding dtoverlay=hifiberry-dac to the /boot/config.txt file. There is a DAC enable pin—BCM 25— that must be driven high to enable the DAC. You can do this by adding gpio=25=op,dh to the /boot/config.txt file. The buttons are active low and connected to pins BCM 5, 6, 16, and 24. The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu. If you want to use these boards with a Pibow Coupé case (either for the Zero / Zero W or Pi 4), then you'll need to use a booster header to raise it up a little. Features: Line-level digital audio (24-bit / 192KHz) over I2S PCM5100A DAC chip 3.5mm stereo jack 1.3" IPS colour LCD (240x240px) (ST7789 driver) Four tactile buttons Mini HAT-format board Fully-assembled Compatible with all 40-pin header Raspberry Pi models Package Includes: 1 x Pirate Audio: Line-out for Raspberry Pi

Specifications

Item Type:	Other Accs.
Audio input/output Port	3.5 Audio Jack
Audio Amplifier IC	PCM5100A DAC Chip
Supported	Raspberry Pi 40 Pin GPIO Header
Display:	1.3" IPS colour LCD
Length (mm):	65
Width (mm):	30.5
Weight (g):	15
Shipping Weight	0.018 kg
Shipping Dimensions	7 × 4 × 1 cm