Pololu DRV8835 Dual Motor Driver Carrier

This is a DRV8835 Dual Motor Driver Carrier. Texas Instruments’ DRV8835 is a tiny dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 0 V to 11 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 1.5 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The DRV8835 is a great IC, but its small, leadless package makes it difficult for the typical student or hobbyist to use; our breakout board gives this driver the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards Since this board is a carrier for the DRV8835, we recommend careful reading of the DRV8835 datasheet The board ships populated with SMD components, including the DRV8835, and adds a FET for reverse battery protection. Note: For more technical data kindly refer attached datasheet Features: Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor Motor supply voltage: 0 V to 11 V Logic supply voltage: 2 V to 7 V Output current: 1.2 A continuous (1.5 A peak) per motor Motor outputs can be paralleled to deliver 2.4 A continuous (3 A peak) to a single motor Two possible interface modes: IN/IN (outputs mostly mirror inputs) or PHASE/ENABLE (one pin for direction and another for speed) Package Includes: 1 x Pololu DRV8835 Dual Motor Driver Carrier

Specifications

Item Type:	Dual Motor Driver Carrier
Motor Driver:	DRV8835
Operating Voltage (V):	0 V to 11 V
Reverse V. Protection (Y/N):	Yes
Logic Voltage (V):	2 V to 7
Motor channels	2
Output Current Per Channel	1.2 A
Peak out. Current/channel	1.5 A
Additional Specs.:	Contin. Parallel O/P Current: 2.4 A
PWM frequency	250 kHz
Shipping Weight	0.015 kg
Shipping Dimensions	11 × 9 × 2 cm