RedPitaya STEMlab 125-14 PRO Gen 2 Starter Kit

The STEMlab 125-14 PRO Gen 2 Starter Kit is designed for professionals who need a fast, flexible, and reliable platform for test and measurement, data acquisition, and real-time signal processing. Built around the upgraded PRO Gen 2 board, this kit delivers low-noise performance, improved analog front- and back-ends, and high-speed connectivity—all in a compact, reconfigurable format. Powered by the Xilinx Zynq 7010 SoC and 512 MB of RAM, the PRO Gen 2 features two input and two output channels, 14-bit ADC/DAC resolution, 125 MS/s sampling rate, and up to 60 MHz bandwidth—ideal for applications in industrial automation, radar, RF, photonics, and OEM system integration. Features: Improved analog front- & back-ends for lower noise and greater signal fidelity 14-bit, 125 MS/s ADC & DAC with wide bandwidth (up to 60 MHz) Xilinx Zynq 7010 SoC + 512 MB RAM for powerful processing and real-time control Multi-channel synchronization & external/internal clock support USB-C connectivity for power and console interface Advanced triggering options via GPIO and extension connectors Robust SMA connectors and high-voltage input tolerance (±20 V HV range) Compact, open-source platform for rapid prototyping, integration, and research Ideal for test engineers, automation specialists, and OEM developers Specifications: 1. BASIC:• System memory: Micro SD up to 32GB 2. CONNECTIVITY:• Ethernet: 1 Gbit• USB: USB 2.0• WiFi: Using Wi-Fi dongle 3. RF INPUTS:• RF input channels: 2• Sample rate: 125 MS/s• ADC resolution: 14 bit• Input impedance: 1M Ω• Full scale voltage range: ±1V / ±20V• Input coupling: DC• Bandwidth: DC - 60MHz 4. RF OUTPUTS:• RF output channels: 2• Sample rate: 125 MS/s• DAC resolution: 14 bit• Load impedance: 50 Ω• Full scale voltage range: ±1V• Short-circuit protection: Yes• Typical rising/falling time: 2V / 10ns• Bandwidth: DC - 60MHz 5. EXTENSION CONNECTOR:• Digital IOs: 16• Analog inputs: 4 channels, 0-3.5V, 12 bit• Analog outputs: 4 channels, 0-1.8V, 12 bit• Communication interfaces: I2C, SPI, UART• Available voltages: -4V, +3.3V, +5V 6. SYNCHRONIZATION:• Trigger input: Through extension connector• Daisy chain connection: Over SATA connection• Reference clock input: N/A 7. GENERAL:• Weight: 0.5kg• Dimensions: 22 × 15 × 8cm Applications: Oscilloscope & Signal Generator – Signal measurement and waveform generation. Spectrum Analyzer – Frequency-domain signal analysis. Bode Analyzer – Gain and phase response measurement. Logic Analyzer – Digital signal capture and protocol decoding. LCR Meter – Inductance, capacitance, and resistance measurement. Vector Network Analyzer (VNA) – Antenna and RF component testing. Software Defined Radio (SDR) – RF signal processing and communication. Signal Streaming – Continuous data streaming to SD card or PC. Calibration Tool – DC and frequency calibration. Marketplace – Access to free community-developed applications. Package Includes: 1 x RedPitaya STEMlab 125-14 PRO Gen 2 Starter Kit Kit Includes: 1 x Red Pitaya STEMlab 125-14 PRO Gen 2 board1 x MicroSD card (with OS image pre-installed)1 x 5V 5A USB type-C power supply1 x Ethernet cable2 x SMA-BNC adapters2 x 50 ohm termination2 x SMA T adapter2 x SMA Cable

Specifications

ADC Resolution	14-bit
DAC Resolution	14-bit
Sample Rate	125 MS/s
Bandwidth	DC–60 MHz
RF Input Channels	2
RF Output Channels	2
Input Voltage Range	±1V / ±20V
Digital I/O	16 Channels
Shipping Weight	0.813 kg
Shipping Dimensions	23 × 23 × 7 cm