SkyRC D260 Duo 260W Dual Channel AC/DC LiPo / LiFe / LiIon / LiHV / NiMH / NiCd / Pb Balance Charger + Discharger + Power Supply With two independent circuits and the ability to charge batteries up to 6S at a maximum of 14A per channel, D260 is a smart choice for RC hobbyists. Multi-purpose for Most Battery Chemistries The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid). Dual Output D260 allows you to charge two different battery packs simultaneously with 130W rated power per channel. The maximum charge current can be 14 amperes. Intuitive Operation The five-button panel and the brightly backlit LCD screen making charging a breeze even for beginners. D260 inherits from other chargers by SkyRC; many users will find it very familiar and easy to get started. Even if D260 is your first programmable charger, you’ll find it easy to learn. Users just scroll through parameters, use up/down keys to adjust values, then click a key to enter. LiHV Mode Available The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35V. Versatile with the Addition of AGM & Cold Modes AGM (Absorbent Glass Mat) battery is maintenance-free, provides excellent electrical reliability, and is lighter than the flooded lead-acid type. However, AGM batteries are far more different than normal lead-acid batteries. Although both of them have the same essential components, they have different chemical structures that make them a lot different from each other. Never take the risk of charging AGM batteries with a regular charger in the normal Pb mode. Smart & Efficient Cooling System Temperature controlled high-speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device. DC Power Supply With just a few clicks, D260 can be turned into a power supply unit to power your hobby equipment. Two channels can be used individually to power two different hobby gadgets simultaneously. Universal Voltage Input With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around! Even in the field, with the built-in DC input between 11V-18V, racers power the charger with their DIY battery packs. PC Software for Data Analysis and Firmware Upgrade ChargeMaster can start/stop the charging process, and view real-time graphs of current, voltage, capacity, and monitor single-cell voltage. Features: Supports up to 6S Lithium Batteries Terminal Voltage Control Re-Peak Mode for NiMH/NiCd Battery Battery Voltage Meter Battery Internal Resistance Meter Power Supply Output 260W/5-25V USB Port for PC Communication snd Firmware Upgrade Can Charge Two Different Batteries on Two Different Channels Package Includes: 1 x SKYRC D260 Charger2 x Charging Cable1 x Power Cord1 x Insturction Manual
Specifications
| Model | D260 |
|---|
| Charging Power | 130W |
|---|
| Operation Modes | CC/CV for Lithium Types and Lead (Pb) Batteries |
|---|
| Input Voltage (VAC): | 110 ~ 240 |
|---|
| Input Voltage (VDC): | 11 ~ 18 |
|---|
| Output Power (W): | 2 x 130W |
|---|
| Discharge Power (W) | 10 |
|---|
| Charge Current Range (A): | 0.1 to 14Ax2 |
|---|
| Dischage Current Range (A): | 0.1-2A |
|---|
| Channels | 2 |
|---|
| Balance Current(mA) | 500 |
|---|
| Drain Current (Id) (A) | 500 |
|---|
| Supported Software | Charger Master |
|---|
| Battery Type | LiPo/LiIon/LiFe/LiHV: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V |
|---|
| Input Type | AC/DC Both |
|---|
| Li-ion/Po cell count | 1 ~ 6 |
|---|
| NiCd/NiMH cell count | 1 ~ 15 Cells |
|---|
| Pb battery voltage | 2 ~ 20 |
|---|
| Length (mm): | 160 |
|---|
| Width (mm): | 150 |
|---|
| Weight (g): | 896 |
|---|
| Dimensions (L x W x H) mm | 160 x 150 x 75 |
|---|
| Shipping Weight | 1.2 kg |
|---|
| Shipping Dimensions | 28 × 20 × 10 cm |
|---|
