Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band

This is a 4G/3G/2G Raspberry Pi communication HAT with GNSS positioning and high-speed LTE CAT4 global band connection. By connecting it to a PC, Raspberry Pi, or Jetson Nano host board, it is easy to enable 4G high-speed networking, cloud platform communication, phone call/SMS, and global GNSS positioning functions. Note: Please check Attachment tab of SIM module comparison. Features: Supports dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high-speed 4G communication Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino The onboard USB-C connector, enabled via a switch, for connecting the standalone power supply for the module, allows more loads, a stable and flexible power supply Onboard power supply on/off switch, reset button, and LED indicator, easy to turn on/off the module or monitor the operating status Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position Onboard audio jack and audio decoder, allow audio operation like making a phone call High-efficiency power supply circuit, up to 3A output current Useful link: waveshare SIM7600G-H-M2 4G HAT Packages Includes: 1 x Waveshare SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band 1 x M.2 TO 4G/5G HAT 1 x SIM7600G-H-M.2 1 x Antenna 2pcs 1 x IPEX adapter cable 2pcs 1 x 2*20PIN pin header 1 x Passive GPS antenna 1 x Dual plug USB3.0 cable 1 x USB3.0 adapter 1 x USB2.0 adapter 1 x SMA protective cap 2pcs 1 x Screws pack

Specifications

LTE Cat-4	LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
3G	UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
2G	GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
GNSS positioning	GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
Item Type:	HAT
Compatibility:	Pi Series
HAT Type:	GNSS HAT
Model No. / Name:	Microcontroller
Supported	dial-up, phone calls, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S)
GNSS	GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
USB	2.0/3.0
Max. Operating Current (A)	3A
Shipping Weight	0.05 kg
Shipping Dimensions	10 × 7 × 3 cm